| Current Polarity | Welding Position |
|---|---|
| DC(+), AC | FLAT, HORIZONTAL, VERTICAL, OVERHEAD |
Business Hours
Monday to Saturday 8:30am to 5:30pm
Distributed By
Washington Central Corporation
Distributed By
Business Hours
Monday to Saturday 8:30am to 5:30pm
High cellulose coated, potassium type electrode for pipe welding in DC(+) as well as AC current condition. forceful and spray arc, ensures deep penetration and weld metal is of radiographic quality. Slag system that is a fast freezing , thin and easily removable.
| Typical Weld Metal Chemical Properties (Element %) | ||||
|---|---|---|---|---|
| Carbon (C) | Magnesium (Mn) | Silicon (Si) | Sulfur (S) | Phosphorus (P) |
| 0.20 MAX | 0.40-0.80 | 0.30 MAX | 0.030 MAX | 0.030 MAX |
| Current Polarity | Welding Position |
|---|---|
| DC(+), AC | FLAT, HORIZONTAL, VERTICAL, OVERHEAD |
| Typical Weld Metal Mechanical Properties (Element %) | |||
|---|---|---|---|
| Yield Strength (N/mm²) KSI | Ultimate Tensile Strength (N/mm²) ksi | Elongation (%) | CVN Impact at °C Joules |
| 330-450 (48-65) | 430-560 (62-81) | 22-30 | -30°C : 50-80 J |
| Size and Current Recommendations | ||
|---|---|---|
| Size D x L (mm) | Size D x L (in) | Current (Amps) DC+, AC |
| 2.5mm x 350mm | 3/32" x 14" | 50-80 |
| 3.2mm x 350mm | 1/8" x 14" | 80-130 |
| 4.0mm x 350mm | 5/32" x 14" | 110-160 |
Not recommended
Note:
The information provided in this article or otherwise referred to herein is merely provided as “typical” without any assurance or promise. Actual results will vary based on a number of variables, including, but not limited to, weld process, plate chemistry and temperature, weldment design, and fabrication procedures. Washington Central Corporation expressly disclaims any liability suffered from any reliance thereon. It is advised that before using any welding consumable or procedure in the intended application, users check their compatibility through qualification testing or other suitable methods.